CNC Three Rolls Plate Bending Machine KS-WB133S
Chat Now! 
Send Inquiry- Product Details
- Company Profile
curtain wall machine 1.plate bending machine 2.panel bending machine 3.CNC control. 4. ACP panel bending machine
The machine is mainly used for the roll bending processing of aluminum composite panel, pure aluminum plate, stainless steel board and steel bar. The NC machine thoroughly solves the problems of only driving the upper roller, and the difficulty of rolling thinner stave and can realize greater declivity of the upper roller and side roller through the change of roller and then roll conical barrel with huger coning; it is with clear operation interface and simple and convenient but precise operation. Therefore, it is one kind of product which can make you obtain high production efficiency, reliability and competitiveness.
Three-roller numerical controlled machine is the most innovative machine in the market at present, and it is especially suitable for the heavy loading work of rolling thickness bar. Very thick plate can be rolled only by increasing the distance between the lower side rollers. The fact has proved that straightway shorter than any others produced by any three-roller rolling machine can be obtained through numerical control software produced by our company in pre-bending of flexible shaft. It possesses many advantages compared with other similar three-roller rolling machines.
Four-roller hydraulic numerical controlled rolling machine has the function of double-end pre-bending. It is the machine with the best performance in the international market; it has advantages not possessed by any other machine; the operator only needs determining the position of the side roller, and it will begin to make the fore-end pre-bending of bar material automatically with shortest straightway left; unlike single-side pre-bending rolling machine which needs the working procedures of sheet material moving out, U-turn, and re-feeding, etc, the four-roller hydraulic numerical controlled rolling machine can finish all the procedures only by passing once.
TECHNICAL PARAMETER
| Model and parameter | CNC Three Rolls Plate Bending Machine |
| Maximum thickness of bending | 5-20 mm |
| Maximum width of bending | 3000mm |
| bending speed | 6m/Min |
| Working mode | NC, hydraulic drive |
| Working voltage | 380VAC/50HZ |
| Driving mode | Oil cylinder independently control 3 rollers, hydraulic motor driven gearbox,3 rollers linkage moving. |
| Power of main motor | 7.5Kw |
| 4380x1100x1420mm | |
| Weight of machine | 5200Kg |
| Matching device | Equipped with feed table, loading station and feeding device, it can become an automatic roll bending centre with high efficiency |
Experience Member
0
Chinese
Supplier
Send Inquiry to This Supplier
- Title
- From*
- to
- Message*
- Minimum Order Quantity*
- Unit
- Verification Code*