HDP401 Chemical Resistant Gloves - HDP401

Chemical Resistant Gloves - HDP401

Description :

PVC-coated glove on Polyester/Cotton support, length: 35 cm. 

Materials:

100% red PVC vulcanized and coated on Polyester/Cotton support.

Strong points:

PVC very resistant to abrasion and chemicals. Fully coated gloves are waterproof. General use reinforced mechanical protection gloves.

Instructions for use:

Protective glove, water and airtight, against mechanical risks designed for general use against micro-organisms (bacteria, fungi), splashes of low concentrate chemical products, with no danger of electrical or thermal risks.

Limits to use:

Do not use this glove of the scope of use defined in the instructions above. This glove does not contain substance known as being carcinogenic, neither toxic, nor likely to cause allergies to the sensitive people. Before using these gloves, check that they are intact. Replace if necessary.

Instructions for storage:

Store in original packaging in a dark, dry place.

Instructions for cleaning / maintenance:

No specific cleaning or maintenance for this type of glove.

Performances :

The levels are obtained on the palm of the glove. 

that the glove has a lower performance level than the minimum for the individual hazard given. X: indicates that the glove has not been subjected to testing or the test method is not suitable due to the design of the gloves or the material.

The higher the performance, the greater, the ability of the glove to withstand the associated risk. Performance levels are based on the results of laboratory tests, which do not necessarily reflect real conditions in the workplace, due to the influence of the other various factors such as the temperature, the abrasion, the dissipation...

? EN388:2003 Protective gloves against mechanical Risks (Levels obtained on the palm)

? EN420:2003 General requirements

Baymro Safety China Co., Ltd.

CCCME Member 0 Chinese Supplier

CCCME Member

Recommended by CCCME