ERP160V - EN 149:2001+A1:2009 Mask - Foldable FFP3 Mask ERP160V

- Product Details
- Company Profile
ERP160V EN 149:2001+A1:2009 Mask Foldable FFP3 Mask - ERP160V
EN 149:2001+A1:2009 Mask Foldable FFP3 Mask ERP160V
Description:
Non-woven synthetic fiber facial filtering. Horizontal. Integrated nose clip for adjustment. Foam reinforcement under nose clip. Elastic straps.
Instructions for use:
This mask is classified in accordance with its filtering capacity and maximum total inward leakage. The mask must be chosen according to the type of contaminant, its concentration (see material data safety sheet) and the protection factors allocated by national laws.
FFP2: Protective mask against solid and liquid particles of average toxicity. Filter efficiency of the filtering medium: 99%.
Examples of applications: Sanding of soft wood, composite materials, rust, putty, plaster, plastics / cutting, deburring, grinding, drilling of metal.
Filtering capacity of the filter: 99%
Hold the preformed mask in the palm of your hand, with the nose bar towards the top and the straps hanging down. Place the mask under your chin, covering your mouth and nose. Take the upper elastic strap and pass it around the back of your head, take the lower elastic strap and pass it round the back of your neck. Mould the nose bar around the nose to seal it off completely. Check the seal by breathing out hard and ensure that no air leaks around the sides of the mask. If necessary, readjust and check again.
This mask should not be used for more than single shift. This mask must only be used once (no maintenance).Only take the mask out of its packaging just before you are going to use it. Only use when the concentration of contaminants does not pose an immediate risk to life or health, and only in accordance with local applicable health and safety standards.
Limits to use:
Do not use other than for the scope of use defined in the above instructions for use. Contact with the skin may cause allergic reactions in people with sensitive skin. In this event, leave the area of risk, remove the mask and seek medical advice.
Instructions for storage:
Store in a cool dark place, in its original packaging (+2°C/+55°C - HR<75%).
Instructions for cleaning / maintenance:
This mask must only be used once (no maintenance).
Warning:
- The user must have adequate training in the wearing of the mask and must have read the instructions before using it.
- Use the mask in well-ventilated areas, where there is no lack of oxygen (> 19.5%) and where there is no explosive at mosphere.
- The mask must be positioned correctly in order to provide the expected level of protection. Do not use if facial hair (beard, sideburns) prevents the mask from being fully sealed, and leakage is detected.
- Leave the area immediately if you experience breathing problems and/or dizziness or faintness.
Performances:
This mask complies with the European directive 89/686, and with EN149:2001+A1:2009 FFP3