M711-Remote I/O Module

This signal conditioner is a 1-channel temperature/mV/Ohm input and 1-channel current output module with RS485 communication . It provides isolation between each channel of inputs, power, and network circuits. Network communication adheres to the industry-standard RS-485Modbus RTU protocol. AC and DC power sources are supported with nonpolarized, diode-coupled terminals. Not only  works as an independent temperature transmitter isolator with communication£¬but combine with MWG1 to constitute a remote I/O DAS support both of MODBUS RTU and MODBUS TCP protocols.

Features

• 1-channel Temperature/mV/Ohm Input, 1 ch. Current Output

• 4-way isolation eliminates potential ground loops between power, Inputand network circuitry

• The input signal type & measurement range can be programmed setting by ZPconfig software  through USB adaptor

•  Hot Swappable

•  Low Power Loss, Low Temperature Drift, Auto Zero Calibration

• Terminal Block & Rail bus  redundant power

• Standard Modbus RTU protocol with high-speed RS-485 communication (up to 115K bps)

• Combine with MWG1 to constitute a remote I/O DAS support both of MODBUS RTU and MODBUS TCP protocols

Specification

¡ô Input Signal Type(Programmable By ZPconfig software)

TC: K/E/S/B/R/J/T/N

RTD: PT100/PT200/PT500/PT1000/Cu50

Resistance: 0~400? 0~4000?

mV: +80mV

Voltage: 0~1V dc

¡ôInput Channel£º1 Channels

¡ôInput Impedance£º¡Ý10M?

¡ôA/D resolution £º24 bit

¡ôCommunication£ºRS485

¡ôProtocol£ºModbus RTU

¡ôBaud Rate£º115200,38400,19200...4800bps £¨config. by DIP£©

¡ôAddress ID£º1-31£¨config. by DIP£©

¡ôRS485Drive Capacity£ºMax. 64nodes

¡ôPower Supply£º24VDC¡À10% or AC

¡ô Response Time£º ¨Q0.4S

¡ô Accuracy£º

TC: ¡Ü 1C¡ã

RTD: ¡Ü 0.2C¡ã

Resistance: ¡Ü 0.05% F.S.

mV: ¡Ü+10uV

Voltage: ¡Ü+10mV

¡ô Sampling Rate£º 9 times/sec.

¡ô Digital Output£º Single PrecisionFloating-Point

¡ôPower Loss£º1W (24VDC)

¡ôTemperature Drift£º0.01%/Celsius degree

¡ôOperation Temperature£º-10~70¡ãC

¡ôStorage Temperature£º -40~80¡ãC

¡ô Relative Humidity£º5-95% non condensing

¡ô 4-way isolation between each channel of input/each channel of output/ communication/power supply£º¡Ý1500VAV/1min

¡ô 4-way isolation resistance£º¡Ý100Mohm/500V

¡ô Calibrating ambient temperature£º25¡À2 ¡ãC

¡ô EMC£ºEN1326: 1997+A1£º1998+A2£º2001+A3£º2003

¡ôRemovable plug-in type terminal blocks rated for 12A/250V; AWG #26-12, stranded/solid copper wire

¡ôCasing/Terminal: IP50/IP20

¡ô Weight: 122g

Dimension

Chongqing Blue Jay Technology Co.,Ltd

Free Member 0 Chinese Supplier

Recommended by CCCME