CR2450-5B
Chat Now! 
Send Inquiry
Recommended by CCCME
- Product Details
- Company Profile
CR2450-5B
Product description
1. Applicability:
This specification is applicable to the following product: Coin type high temperature manganese lithium battery CR2450.
Daily-max： | CR2450 |
IEC： | CR2450 |
Maxell： | CR2450 |
SONY： | CR2450 |
DURACELL： | DL2450 |
2. Battery type and ratings
Electrochemical System | Lithium manganese dioxide/organic electrolytes | ||
Nominal Voltage | 3V | ||
Nominal Capacity (Continuous Discharging Under 7.5kΩ load to 2.0V End-Voltage at 20℃) | 600mAh | ||
Operating temperature range | -20℃~70℃ | ||
| diameter（A） | 24.5(-0.3)mm | |
height（B） | 5.0(-0.4)mm | ||
Mass | Approx6.6g | ||
Appearance and poles | Appearance should be smooth, clear mark, no deformation, rust, and leakage | ||
minimum average duration （7.5kΩ） | Initial test (New battery in 60 days) | 1450h | |
After 12 months | 1370h | ||
Open Voltage | Initial test (New battery in 60 days) | 3.10V-3.45V | |
After 12 months | 3.10V-3.45V | ||
Closed Circuit Voltage（7.5kΩ） | Initial test (New battery in 60 days) | 3.10V-3.45V | |
After 12 months | 3.00V-3.45V | ||
Leakage Characteristics (Over discharge) | No Leakage | ||
3.Test Method
Item | Condition | |
1 | Dimensions | When measure with vernier calipers which precision is up 0.02mm. to avoid short circuit, should paste on one insulation material on one end of the vernier calipers. |
2 | Open voltage | the precision of multimeter is not lower than 0.25%, intel resistance is bigger than 1MΩ |
3 | Instant short-circuit current | When test with multimeters, not surpass 0.5 second each time, avoid duplicating tests, if need once more, the time-gap should above half hour |
4 | Appearance | Appearance of batteries shall be inspected by visual means. |
5 | Min time of discharge | Lay aside above 8 hours in the temperature of 20±2℃ and under the humidity of 60±15% conditions, with the condition that Resistance is 15kΩ, end-point voltage is 2.0V. The new battery (Initial stage) should be tested in 60 days after produce. The old battery (Delayed for 12 months) should be tested in 14 days after the storage period. |
6 | Over-discharge Characteristics | Take nine battery in the temperature of 20±2℃ and under the humidity of 60±15% conditions, with the condition that Resistance is 15kΩ, end-point voltage is 1.2V. visual test. |
4.Acceptance rule
4.1 Delivery inspection for each shipment quantity for a test batch。
4.2 Delivery inspection using GB2828.1-2003 Normal inspection sampling plan at a time，inspection item、inspection level（IL）、acceptance quality limit（AQL）According to the provisions of the table below。
Check item | IL | AQL | |
1 | Dimensions | I | 0.25 |
2 | Open voltage | 0.25 | |
3 | Appearance | Ⅱ | 0.25 |
5.Important Notes（Warranty）
5.1No swallowing
Keep the battery out of reach of children. Never put batteries in mouth. If ingested, immediately seek medical attention.
5.2No recharging
Forbid using any other power supply to charge the battery. Recharging can lead to produce gas and internal short circuit, causing cell deformation, leakage, overheat, explode or catch fire.
5.3Do Not Dispose In Fire
The lithium will be melted when dispose in fire.
5.4Do Not Disassemble
Do not disassemble the battery or it will cause the damage of gasket or the separator, deformation, leakage, over-heat, explosion or firing will happen.
5.5Insert Batteries Correctly
Depending on the application device, incorrect insertion of batteries, with positive(+) and negative(-) poles reversed, may result in short circuits and the risk of heat generation, fire or explosion.
5.6Do Not Short-circuit
Do Not Short-circuit. Do not keep or store the battery with metal or it will cause deformation, leakage, over-heat, explosion or firing.
Do not take several pieces of batteries from the packing box at one time or stock mixed, it can lead deformation, leakage, over-heat or firing.
5.7Do Not Mix Different Types Of Batteries
For some application, mixing different types of batteries, or new and old batteries, can cause over discharge due to difference in voltage and electrical capacities. This may lead to the risk of swelling or explosion.
5.8Do Not Weld Pin Or Wire Directly On The Battery
The lithium will melt when welding or cause damage of insulation material. This will lead deformation, over-heat, explosion or firing. If weld is needed, please contact Daily-max or professional welder.
6.Cautions
6.1Shaking、jumbling、Scatters or trampled batteries, may cause short circuits, heat generation, fire or explosion.
6.2 Install batteries, please be careful when operating, don't let the battery come into contact with metal objects could make the battery short circuit.
6.3Selecting suitable batteries as the operation instructions.
6.4Do not use or store the batteries in high-temp places like exposure sunshine or in car which in burning hot, it will lead deformation, leakage, over-heat, explosion or firing.
6.5Do not let the battery contact water or store in a wet environment or it will cause rust, deformation, leakage, over-heat, explosion or firing.
6.6The voltage may lower than target one by bad contact so pls keep 2N contact pressure.
6.7If any questions please contact Anyida.
7.Storage Environment
The storage environment should be clean, cool, dry, ventilation, do not close to high-temp or high moisture, the environment temp should 0℃-30℃, RH not exceed 75%.
8.Marking and Packing
8.1Sign Of Positive Pole
Different brands can be as customers’ requests.
8.2Date Code
If customers need date code as IEC standard with 2 words:□□, the first one expresses year by 0-9, the second one expresses Jan-Sep by 1-9, O, Y, Z means Oct-Dec.
Examples:01 means manufactured in Jan-2020； 0O means manufactured in Oct-2020；
0Y means manufactured in Nov-2020； 0Z means manufactured in Dec-2020。
Different date code can be made.
8.3Packing
Each 20pcs in a PVC tray, 10 trays(200pcs) be packed by PVC film, 12 small packages (2400pcs) in a outer carton..
If the batteries need to be with pins, the packing will be changed by product appearance
9.Discharge characteristics
With the progress of product technology, technical parameters, the specification will be updated too, please contact Anyida for latest specification.
Experience Member
0
Chinese
SupplierSend Inquiry to This Supplier
- Title
- From*
- to
- Message*
- Minimum Order Quantity*
- Unit
- Verification Code*