JQ4B250 can production line

Estimated production capacity: 600 cans/min. The following models of liquid nitrogen filling system are recommended: 1, Lin Master Coco 2, production capacity: Up to 2000 cans/min, equipment System Description (1) function: by adding nitrogen to aluminum cans and pure water, it can increase internal pressure, deoxidize, reduce the weight of bottles, and use light bottles. (2) vacuum (less than 110-5 MBA) insulation-ultra-low daily evaporation to reduce operating costs. 3) the nozzle uses a dry nitrogen blanketing system to prevent outside air from entering the nozzle and causing frosting inside the nozzle. It is truly non-freezing, does not require blowing, and does not require drying before turning the machine on or off, saving time. No external heating, reduce the gasification of liquid nitrogen, cost saving. At the same time, the flow and direction of liquid nitrogen are kept stable, which is not changed by the positive pressure of the purification workshop or the wind generated by the high-speed operation of the filling seal. (4) the liquid nitrogen level is controlled by the liquid level probe and the vacuum pneumatic low temperature proportional control valve to keep the liquid level stable and improve the accuracy of filling. When the float ball is controlled, the liquid nitrogen supply pressure should not exceed 1.5 bar. When the float ball exceeds 1.5 bar, the float ball will be seriously damaged and the whole machine will be scrapped. (5) through reading the speed of the filling and sealing machine, according to the preset program (can store 20 different products of the program) , to achieve the filling volume (valve opening degree%) of automatic compensation, automatic regulation. (6) continuous true soft filling is used to reduce the rebound, splash, evaporation and boiling of liquid nitrogen due to individual filling. Reduce the loss of liquid nitrogen, reduce high-pressure and low-pressure products, cost savings. (6) have Chinese, English, two languages, switch at any time. (7) the utility model has the function of a gas-liquid separator and maintains the outlet as pure liquid nitrogen. No additional gas-liquid separator is required. (8) it has the function of automatically tracking the speed and position of the filling and capping machine. (9) it has the communication function with the filling and sealing machine. (10) in the case of speed changes, filling flow will be automatically adjusted. The flow regulation, that is, the percentage of the opening of the valve, is automatically switched according to the pre-set menu to ensure that the actual filling amount is changed automatically according to the parameters set at the time of trial production in case of speed change, thus achieving different filling amounts and ensuring uniform product pressure between ¡À 0.1 bar at different speeds. (11) advanced and scientific inlet valve design, with bellows compensator and gas seal device to extend the service life of the machine. (12) adopt the unique valve needle design with pressure reducing device, reduce the soft filling, reduce the pressure of filling, realize the real soft filling. (13) less vulnerable parts, no need to replace the valve needle. 1) : LIQUID NITROGEN: LIQUID NITROGEN: liquid nitrogen machine inlet pressure 1.5 bar-7.0 Bar 2) : Gaseous Nitrogen: 3.0 bar-7.0 Bar 3) : Power Supply: 220 V/50 HZ recommended supply 1) liquid phase: large tank: bottom outlet, using a low temperature vacuum tube transport, outlet pressure at 8 KGF/CM32) gas phase: using dry nitrogen, nitrogen produced by the vaporizer, the capacity of the vaporizer is 50 nm 3, the temperature is 23 ¡ãc ¡À 15 ¡ãC dosage: about 1.0-25 l liquid nitrogen per hour 1. Bottle Washing 2. Filling 3. Sterilization 4, Cooling, testing? This machine is mainly used for the processing, filling and capping of PET bottles containing carbon dioxide gas . 1. Technical Structural Features A . Bottle rinsing part: This machine is a rotary bottle rinsing machine, which is mainly used for rinsing new bottles of drinks, water and other products . The bottle is then sent to a filling machine for filling the product . The PET bottle enters the equipment from the separating bottle star wheel by the clamp and the turning mechanism to clamp the bottle mouth to turn to the bottle mouth down, after the aseptic water rinses drains, the automatic turning to the bottle mouth to turn up, transports through the bottle star wheel to the filling machine . The main structure of the equipment is made of stainless steel with the contact part of the flushing medium and the outer protective cover . The new stainless steel clamp, simple structure, easy adjustment, less contact area with the bottle mouth, effectively avoid the second pollution of the bottle mouth When the inlet pipe of the bottle-flushing machine is equipped with a pressure gauge and a receiving plate for recycling the bottles, the amount of water to be flushed per bottle is 105 ml/s (0.25 MPA) B . Filling part: filling machine is introduced German technology, using the principle of isobaric filling design and manufacture, to achieve the liquid filling machine sent by the washed bottle . The filling valve uses the equal pressure Type Mechanical Valve, the filling is quick and agile, the filling liquid level precision is high The guide rod is used for centering, and the unique bottle-locking technology is adopted to ensure the accurate sealing of the bottle mouth and the filling valve, and to reduce the leakage of materials from the bottle mouth The main drive adopts gear drive or open combined drive, which has the advantages of high efficiency, low noise, long service life, convenient maintenance and full lubrication The bottle guide system is simple in structure and can be changed quickly and conveniently according to the bottle type . The whole machine PLC automatic control, fault on-line display, such as blocking bottles, missing caps and so on . In the filling cylinder material automatic control, the liquid level height uses the liquid level sensor detection, guarantees the liquid level stable and the filling reliable . The key parts and electrical components of the machine are imported . C Sentence is too long, please supply a shorter sentence . OPTIONAL EQUIPMENT: Automatic machine or artificial bottle system, full/semi-automatic washing machine, automatic unloading machine, bottle storage, labeling machine, carton packaging machine Production capacity: We have a complete line of products that can be supplied from 2,000 bottles per hour to 36,000 bottles per hour (500 ml PET bottles) . .

Zhoushan Jinqi Food Machine Co., Ltd.

Experience Member 0 Chinese Supplier

Recommended by CCCME