SUBMERSIBLE DRAINAGE PUMP (POP1/POP2)

PERFORMANCE

When designing performance levels for POP pumps, special attention was given to typical requirements for domestic usage.

¡ù performance curves specially designed for high delivery rates at the low installed power rating.

STRUCTURAL CHARACTERISTICS

¡ù delivery body made from fiberglass reinforced technopolymer, particularly resistant to mechanical stress,knocks and corrosion,

¡ù suction strainer made from fiberglass reinforced technopolymer, providing the support base for the pump.

¡ù Technopolymer hose joint with screw fitting.

¡ù general electric Noryl gfn2v technoplymer open impeller.

¡ù external float switch for automatic pump operation.

¡ù stainless steel motor shaft.

¡ù double mechanical seal carbon/alumina on the pump side and sealing ring on the motor side(with barrier oil chamber to lubricate and cool 

the sealing surfaces in the absence of water).

¡ù sealed induction motor,suitable for continuous duty with built-in thermal cutout relay(motor protector).Insulation Class F(provides the 

motor with a considerable overload tolerance and substantially increases the service life of motor itself).Cooling of motor assured by the 

liquid in which the pump is immersed.

¡ù protection IP 68

¡ù H05 RN-F Neoprene submersible supply cable.Supplied standard with 5 meters of cable and plug (10 meters on request).

¡ù construction and safety standards in compliance with the EN 60 335-1 (IEC 335-1,CEI 61-150)EN 60034-1(IEC34-1,CEI 2-3).

NINGBO TIME MACHINERY INDUSTRIAL CO., LTD.

Free Member 0 Chinese Supplier