Burst test stand is mainly used for proof pressure and burst test of products including radiator, condenser, evaporator, intermediate cooler, core and fan heater, oil cooler, heater, pressure meters, fire equipment, metal joints, valves, hose assembly, pipeline, pipe, pressure containers and pressure transmitter. Parameters such as test pressure, pressurization rate and temperature can be set during the test procedure. The machine may complete automatically after setting.

Technical parameters

1. Test pressure: 0~500MPa (select range according to need)

2. Medium: water, water- glycol and hydraulic oil;

3. Pressurization rate: 0~300MPa/min; adjusted at will (the time unit may be transformed into S). 

4. Environment temperature: -60-180¡æ

5. Media temperature: RT-180¡æ

6. Piece number of single test: 1 piece.

7. Diameter of tested sample: ¦µ3£­¦µ150mm;

8. Length of tested sample: 100£­¦µ1000mm;

Burst test, leakage and proof pressure test.

a) Stepless regulation for pressure;

b) Safety protection of pressure relief;

c) Maximum test pressure: 500 MPa

2. Typical testing procedures: 

a)pressurization with constant speed-burst

         b)Pressurization with constant speed-pressure maintaining-burst; 

       c)Pressurization with constant speed-pressure maintaining- pressure relief 

        d)Pressurization with constant speed-pressure maintaining-pressurization with constant speed-pressure maintaining-            until burst 

Tianjin Getes Testing Equipment Technology Development Co., Ltd.

Experience Member 0 Chinese Supplier