720F Intelligent Sweeping Robot
Chat Now! 
Send Inquiry
Recommended by CCCME
- Product Details
- Company Profile
720F Intelligent Sweeping Robot
720F Low Configuration Specification
Catalogue：
1 Product Feature：
2 Product Specification:
3 Walking Pattern：
4 Product Safety Measures：
5 Recharging Station：
6 Battery Charging：
7 Safety Test Requirements：
1 Product Feature：
Sweep the floor: bilateral brush (Buckle design to easy disassemble, total six brushes.)
Mop the floor: drying mopping method (mopping cloth +mopping plate), wetting mopping (mopping cloth+water tank)
Dust suction: with floating suction, suction is more than 800pa.
Remoter: over 5 meters
Charging method: charging directly + automatic recharge (randomly + along the wall)
Walking pattern: four kinds of cleaning pattern (random pattern, spiral model, along wall model, bow pattern or zig-zag)
Fall prevention: three fall prevention sensors, it can be adjusted and suited for different floors with different reflection.
Anti-collision: mechanical anti-collision + infrared anti-collision (optional)
Failure warning: wheels stuck/robot offs the floor/charging abnormal/front bumper stuck and so on.
2 Product Specification
Rated power: 30W
Battery specification: 2200mAh 10.8V li-ion battery
Power adapter: 19V 600mA
Charging time: about 4-5h
Sweeping endurance time: 60min ± 10%
Suction: Suction is over 800Pa
Working noise: ＜70dB
Robot size: ￠330x76 mm
3 Walking pattern:
- Starting up status: one button to start, starting up with music; the green light is always on when it has power; the red light is always on when it has not power; it goes into stopping status after starting if it has electricity; it goes into recharging status after starting if it has not electricity.
- Random cleaning: press random cleaning button on the remoter, change it into manual pattern; the green light is always on when it has power; the red light is always on when it has not power; it will be changed into the “along edge” pattern after six minutes of “automatic pattern”; it is always doing the random cleaning during manual pattern.
- Spiral cleaning: press spiral cleaning button on the remoter, it is manual pattern; the green light is always on when it has power; the red light is always on when it has not power; it will be changed into bow pattern from automatic pattern if it doesn’t contact wall or offs the floor for180 seconds or bumping wall; It will be changed into automatic pattern from manual pattern when it contacts wall and then change the automatic pattern into random cleaning.
- Cleaning along the wall: press the “along the wall” button on the remoter, and change into manual pattern; the green light is always on when it has power; the red light is always on when it has not power; it will be changed into spiral cleaning after enduring three minutes in the automatic pattern; It is always doing the “along the wall” cleaning during manual pattern.
- Bow walking pattern: press the “bow walking pattern” button on the remoter and then change it into manual pattern; the green light is always on when it has power, the red light is always flashing when it has not power. It will be changed into random pattern after spending seven minutes from automatic pattern, it is always doing bow walking sweeping during manual pattern; turn left or turn right 180 degree.
- Recharging walking during random pattern: choice “recharging pattern” after starting or press recharging button on the remoter or randomly walking along the all for 150 seconds during recharging walking; the green light is always on when it has power; the red light is flashing when it has not power; looking for recharging station for 150 seconds and then turn to walking along the wall to look for recharging pattern, walking one time for 3 seconds to turn left or turn right for walking pattern, and walking for 4 seconds to turn right or turn left next time; close the fan.
- Along the wall pattern during recharging walking: the green light is always on when it has power, the red light is flashing when it has not power; looking for recharging station for 150 seconds and then turn to look for recharging pattern; close the fan.
- Cycle pattern: the green light is always on when it has power, the red light is flashing when it has not power, normal cleaning pattern (spiral-bow walking-random-along the edge-spiral), find recharging pattern (random-along the wall-random)
4 Product safety measures
- Off the floor: it is off floor status when the product over the floor which has same material to 7.5cm; the indicator light is flashing with warning music, the wheels are backing, the product is stopped after checking for 3 seconds when it is wrong.
- Stuck the big wheels: the front bumper is always blocked or it is blocked continuously for the wheels, the indicator light is always on with warning music, the product is stopped after checking for 3 seconds when it is wrong.
- Stopping pattern: the green light is always on when it has power, the red light is flashing when it has not power by pressing stopping button or forward button or left button or right button or backward button to run till to stop; the forward button goes straight ahead until it automatically stops when it hit an obstacle. It can be press for a long time for the left button and right button, it will stop automatically by turning 20 degree each time. It will stop automatically by backing 15cm by pressing backward button; it will back 20 cm till to stop if it meets obstacle by pressing forward button.
- It is full for dust bin: the robot will go on running by flashing the warning light when the dust bin signal is detected full.
- Didn’t assemble dust bin: the robot is stopped without dust bin. Should assemble the dust bin and then close the top cover , reopen the robot, the warning light is on.
5 Recharging station
It will go into “looking charging station pattern” automatically if it doesn’t have enough power; it will back to “charging station” to charge when the robot searched the signal from charging station.
6 charging the battery
- Power is low: the red light is always on and start to look for charging station pattern automatically when the battery voltage is lower than 9.6V.
- Power is too low: all the lights are out and the robot will be stopped when the battery voltage is lower than 8.7V.
- Battery is charging: the green indicator light is flashing and it will have music in the beginning of charge.
- Finish charging: the green indicator light is always on.
- Charging time: about 4-5 hours (it depends on the battery capacity)
7 Safety test requirements
whether has 3C certificates: yes
Safety general requirement of GB4706.1-2005 for home and similar electronic appliances.
Special requirement of GB4706.7-2014 for vacuum cleaner and suction cleaning appliance
Electromagnetic compatibility GB4343.1-2018
Limited value of electromagnetic compatibility GB17625.1-2012
Experience Member
0
Chinese
Supplier
Send Inquiry to This Supplier
- Title
- From*
- toFan Li Gang
- Message*
- Minimum Order Quantity*
- Unit
- Verification Code*