TCO End-point Control System in Non-inverted Converter Steelmaking/probe
Chat Now! 
Send Inquiry
Recommended by CCCME
- Product Details
- Company Profile
TCO End-point Control System in Non-inverted Converter Steelmaking/probe
TCO End-point Control System in Non-inverted Converter Steelmaking
I.Brief Introduction：
Converter steelmaking process of 40-150 tons，when the converter is blown to the end point, TCO End-point Control System will automatically put in the detection probe from the discharging port by the throwing equipment without furnace switching. The temperature of molten steel and the content of oxygen and carbon will be detected within 8 to 12 seconds. The instrument and screen will display the detection results at the same time to guide the operators in the next smelting operation。
The system has passed the evaluation of experts in metallurgical industry and has been successfully applied in many steel mills in China .
II. Equipment list
It is composed by probe-release device and Detecting instrument device;
Bomb-release device can automatic control and inspect as required;
Detecting instrument device is made of 1)Probe, 2)Signal Processor and 3)Display.
III，Main Technical Specification
1:Testing successful rate above:95%
2：testing speed8-12S
3：Testing period15S
4:Temperature Range:1500-1790’C
5：Oxygen Content:0-1500ppm
6:Carbon Content0.03%-0.15%
7：Probe testing accuracy:+-10’C
IVCharacteristics:
1)TCO End-point Control System has the advantages of simple equipments, small footprint, reliable operation and less investment
2)Reduce the blowing time by 3-5 minutes per furnace，improve productivity.
3)Save energy, Deoxidizer and so on, and reduce the consumption of lining refractory。
4)Reduce accidents such as splashing
Experience Member
0
Chinese
Supplier
Send Inquiry to This Supplier
- Title
- From*
- toChangLiHua
- Message*
- Minimum Order Quantity*
- Unit
- Verification Code*