High flow CO2 Aluminium regulator

SR300 Series High Flow CO2 Aluminium Regulators

DESIGN/CONSTRUCTION

• Designed for CO2 application (non-siphoned tube cylinders)

• High flow CO2 applications with adequate supply or source

• Designed for core wire applications

• Machined aluminum body & housing cap

• Stem type seat mechanism

• 1.75" (44.5 mm) diaphragm - fabric reinforced neoprene

• Self reseating relief valve (not designed to protect downstream equipment)

• Sintered inlet filter - bronze

PERFORMANCE

Maximum inlet – 1500 PSIG

Delivery range – 100 SCFH

A regulator equipped with a flow gauge is not accurate when a back pressure in excess of

2 PSIG exists at the outlet. Back pressure is caused by a restriction in the equipment

downstream of the flow gauge. Metering valves, kinked hoses or even very long hoses

are restrictions that can cause back pressure. In applications where back pressure in

excess of 2 PSIG can be expected, a regulator equipped with a flow meter should be used.

NINGBO KIMPIN INDUSTRIAL PTE LTD

Experience Member 0 Chinese Supplier

Recommended by CCCME