Solar Cells:Monocrystalline 156.75 ¡Á 156.75mm No.of Cells:60 (6 ¡Á 10) Dimensions:1658*992*6.5mm/1658*992*35mm

HT60-156M(PD)/HT60-156M(PDV) series Monocrystalline Solar Module are composed of 60 pieces full-cut mono perc cells, and its power output can be up to 300W/305W/310W/315W/320W. Moreover, it has advanced surface treatment and lower surface reflection, and 5BB cell design can reduce the series resistance and improve the module efficiency. With good design, it can be 19.5% module efficiency. With its advantages, its main merkets are Asia and Africa.

Engineering Drawing

Electrical Charateristricts

*STC:Irradiance 1000W/m2£¬module temperature 25, AM=1.5

Optional black frame or white frame module according to customer requirements

NOCT

*NOCT:Irradiance 800W/m2£¬ambient temperature 20¡ãC£¬wind speed 1 m/s

I-V Curves

Mechanical Characteristics

Temperature Characteristics

Warranty

10-year product warranty
30-year warranty on power output
Specific information is referred to the product quality guarantee

1. Will the excessive installation of photovoltaic modules have the same impact on the ecological environment as wind power generation?

The principle of wind power is to convert mechanical potential energy into electrical energy. The rotation of the fan has certain noise pollution and has a certain impact on the ecological environment. Therefore, the city is not suitable for construction. It is generally built in deserts or shallow seas. Photovoltaic power generation is absorbed by Monocrystalline Solar Module Solar radiation is converted into electrical energy, no mechanical work, no noise pollution, no radiation. At present, photovoltaic power plants mainly have two types of applications. One is large-scale ground power stations, which are mainly distributed in the sparsely populated places in the northwest. Such as household roofs, industrial and commercial roofs, fish-light complementary, etc., these two models will not cause climate and ecological damage, but will reduce carbon dioxide emissions and improve the quality of the ecological environment.

2. How to determine the number of components in series or parallel when the photovoltaic power generation system is installed?

1. It is recommended not to use different types of components in the same solar photovoltaic system. When the components are connected in series, the voltage of each string cannot exceed the maximum voltage of the system. The maximum number of components in series depends on the formula; the system voltage of the component (1.25* open circuit voltage)

2. When the components are connected in parallel, it is recommended that the output current of the entire string of components be equal to the sum of the current of each branch component or component string. Each string of components must be installed with a fuse, you can refer to national or regional or local regulations, the maximum number of parallel components reference formula: maximum protection current / short circuit current + 1.

3. Which components need to be grounded when installing the photovoltaic system?

1. It is recommended that in the photovoltaic power generation system, all uncharged metal parts and equipment shells should be grounded, such as photovoltaic modules, photovoltaic module brackets, inverter shells, grid boxes, etc. The Monocrystalline Solar Module have prefabricated grounding holes, which can be directly connected in series for protective grounding, and the grounding terminal of the inverter can be directly grounded separately or can be grounded in parallel with the base line of the grid-connected cabinet.

2. After the installation of the system is completed, before the test run, the Jinisining Insulation Test Insulation Tester shall use a shaker. The insulation test shall be performed by two electricians.

XI'AN YUANFAR INTERNATIONAL TRADE COMPANY

Free Member 0 Chinese Supplier

Recommended by CCCME