Non Sparking Tools The Non Sparking Tools Are Made Of Aluminum Bronze, Beryllium Bronze And Copper Alloy. Beryllium Bronze: Al: 0.15%, Fe: 0.15%, Si: 0.15%, Ni: 0.2-0.4%, Ti: 0.1-0.25%, Be: 1.8-2.0%, Cu Other: 0.6%  Aluminum Bronze: Al: 9-10% Mn:3-5%, Fe: 3-4%, Ni:5% Cu Copper Alloy: Al:9%, Co: 8%, Ni: 2-3% Cu

 Material: Brass, Aluminum Bronze And Beryllium Bronze

Handle: Fiberglass Handle, Wooden Handle And Plastic Handle

Technical Data Of Sledge Hammer

Attentions
When Using A Sledge Hammer, The Connection Between A Hammer Head And A Hammer Handle Must Be Reliable; If Slightly Loose, Should Immediately Add The Wedge Fastening Or Replace The Hammer Handle; The Length Of The Handle Of The Hammer Must Be Moderate. Should Pay Attention To The Following Points: Hammer Features No Quenching, No Cracks And Burrs; Once Found, The Flash Volume Should Be Repaired Promptly. The Hammer Head And The Handle Must Be Firmly Connected, Usually A Hammer Head And A Hammerhandle Is Absolutely Not Loose, Splitting And Crack Use.

Cangzhou Dean safety special tools CO.,LTD

Free Member 0 Chinese Supplier