Mist Eliminators

Pad Mist Eliminator or mesh mist eliminator pads

Has support grids at the top and bottom. Pad mist eliminator applications require special consideration to assure the removal of entrained moisture in the effluent gas stream.

Woven wire mesh pad mist eliminator

The woven wire mesh pad mist eliminator provides gas-liquid separation at lower mist eliminator cost. However, due to lower gas velocity limitations than vanes it requires larger more costly separator vessels to achieve effective separation.

Mist eliminator pads materials

Mist Eliminator Pads Mesh and grids may be made from most metals and plastics i.e. SS-304, 304L, 316, 316L, 430, Monel, Nickel, Copper, P.T.F.E. (Teflon), H.D.P.E., P.P. etc. and other metals, alloys or plastic which can be drawn or extruded.

Mist eliminator pads are made up from knitted materials with interlocking asymmetrical loops of metal or plastic with typical wire diameters being 0.1 – 0.3mm. By careful choice of wire diameter, Knitted wire products have produced knitted mesh mist eliminators with extremely high free volumes (typically 98-99%) along with very high removal efficiencies and low pressure drop.

Separations & Mass-Transfer Products Division has produced high efficiency knitted wire mesh mist eliminators for free water droplet removal from vapor streams up to 99% removal of droplets 3 micron and larger. Mist eliminator drain roles greatly improve glycol and amine solvent loss reduction.  This role feature may be added or specified on any standard mesh pad application for increased droplet removal efficiency performance and overall capacity.

Pad mist eliminator specifications:

1. Pad: demister 2ft. WD × 10ft. LG × 6 inch

Thick 316SS

Size: 2ft. WD × 10ft. LG × 6 IN THK

Material: 316SS

Density: 120 KG/M3

Contact surface: 400 M2/M3

Free space: 98.5%

Application: fine entrainment.

Width: 2 feet

Thickness: 6 inch

Length: 10 feet

2. Pad: demister 12 inch width × 120 inch length × 4 inch 

Thick 316SS 

Size : 12 IN WD × 120 IN LG × 4 IN THK 

Type : COALESCER / demister

Material: glass fiber -32 SWG 

Density: 15.3/4 LBS/CFT 

Contact surface: 400 M2/M3 

Free space: 98.5% 

Application: fine entrainment. 

Width: 2 feet

Thickness: 4 inch

Length: 10 feet

3. Stainless steel demister pad ASY, 304SS, KOD 95-301 

Description: Demister pad assembly fuel gas knockout drum

Drawing No.: 2207V131 

Material: 304SS 

Thickness: 200MM

Density: 144kg/M 

Vessel ID No.: 1500MM 

Equipment tag No.: QCC-01-AUX-95-301 

With support rin/ grid, the wire and holding fasteners pad shall be in section

KOD operation conditions given below: fluid; fuel gas.

If you are interested this that you can contact us via info@mist-eliminator.org

Boegger Industrial Limited

Free Member 0 Chinese Supplier