Specification: E1 to ethernet protocol/interface converter FC/SC 1/2 core fiber single mode/multimode BNC/RJ45 AC/DC 2~120km Desktop

 China Supplier Over RJ45 E1/Ethernet Managed Protocol Converter

Product Overview

    FC-PCE51 converter is based on FPGA, providing one framed E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.

Product Features

Ø Can realize monitor and control of remote equipment, OAM management data did not  take up user’s timeslot and save E1 bandwidth

Ø E1 supports any timeslot set, the rate is 64K-2048K

Ø The local device can forced the remote device rate follow it

Ø Have the function of E1 interface loop back check, avoid the converter crashed because of interface loop return;

Ø Have indicator  when the device is power-off or E1 line is broken or lose signal;

Ø Can set the E1 line that not to send the LINK signal to Ethernet interface while E1 line is broken;

Ø The Ethernet interface supports jumbo frames (2036 Bytes);
Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering 

Ø Ethernet interface supports10M/100M, half/full duplex auto- Negation and AUTO-MDIX 

Ø Have Ethernet monitor self-reset function, the equipment will not dead

Ø Can achieve the remote device setting any 5 mode of Ethernet and can closed the AUTO-MDIX function; 

Ø Provide 2 clock types: E1 master clock and E1 line clock;

Ø Have three Loop Back Mode: E1 interface Loop Back (ANA),Ethernet interface Loop Back(DIG),Command the remote ,Ethernet interface Loop Back(REM)  

Ø Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;

Ø Support SNMP Network Management;

Technical parameters

Networking Applications 

FCTEL	OEM manufacturer
Factory	Located in Hangzhou
Special requirements	Hangzhou Future Technology Co., Ltd. Free Member 0 Chinese Supplier Location:HangZhou,Zhejiang,China Business Type: Main Products:pcm mux,pdh multiplexer,media converter,protocol converter,fiber modem,optic mulitplexer,E1 balun converter,video converter,ethernet switch,TDM over IP  "Design and manufacture the most reliable and efficient fiber optic   Communications products in the industry. "   8+ Years of Manufacturing Quality Products in the Mainland   Overview   Founded in 2008, FCTEL designs and manufactures Ethernet, Voice and Data communications products for fiber optic networks.    Why Choose Us   Choosing the right product for your communication network is important, but choosing the right company is even more critical. FCTEL takes pride in being that "right" company.    Quality of Product   Engineering and production departments both feature extensive on-site testing equipment to verify that all products exceed pertinent industry and environmental specifications.    Corporate Documents   FCTEL's products are ICA Compliant and are manufactured and produced in the mainland of China. FCTEL also operates a Quality Management System as compliant with ISO 9001: 2008 requirements   More+ Send Inquiry to This Supplier Title From* toWendy Message* Minimum Order Quantity* Unit 20' Container 40' Container 40' HQ Container Piece(s) Bag(s) Box(es) Foot(Feet) Meter(s) Pair(s) Ream(s) Roll(s) Set(s) Square Meter(s) Square Foot(Feet) Ton(s) Yard(s) Other Verification Code* Specialized Industries