您好,欢迎进入中国机电产品进出口商会[请登录][免费注册] 我的办公室 |客服中心|English
- 资讯
WTO 印度尼西亚通报 G/TBT/N/IDN/126/Add.1
来源:CCCME
WTO.印度尼西亚通报能源和矿产资源部关于强制执行印尼晶体硅光伏组件国家标准的法令草案
编号：G/TBT/N/IDN/126/Add.1
关于强制执行印尼晶体硅光伏组件国家标准的能源和矿产资源部2021年第2号法令正在制定中。该法令对组装在模块中或组装成面板的光伏电池强制执行3 SNI，HS ex.8541.40.22标准。本法规涵盖的所有产品应符合：
1. SNI IEC 61215-1:2016，地面光伏组件（FV）-设计鉴定和型式认证-第1部分：试验要求；
2. SNI IEC 61215-2:2016，地面光伏组件（FV）-设计鉴定和型式认证-第2部分：试验程序；
3. SNI IEC 61215-1-1:2016，地面光伏组件（FV）-设计鉴定和型式认证-第1-1部分：晶体硅光伏组件试验的特殊要求。
制造商或进口商使用SNI标志（SPPT SNI）应获得批准，并在产品通过印度尼西亚/KAN国家认证委员会认可的产品认证机构认证后，在产品上贴上SNI标志。
晶体硅光伏组件认证的程序和过程按照附录II进行，附录II是本法规不可分割的一部分。
免除强制性SNI的晶体硅光伏组件是用作SPPT-SNI发行测试样品和/或用于研发的测试样品的组件。获得豁免函的程序在作为本法规组成部分的附件I中进行了说明。
在合格评定机构数量不足的情况下，总局将任命新的合格评定机构，任期最长为两年，可延长1次，最长为两年。合格评定机构的任命程序在附件III中进行了说明，附件III是本法规的组成部分。
本部长条例生效时（2021年1月7日），
•在本法规生效前已被用户使用的晶体硅光伏组件产品无义务遵守本法规。
•在2021年1月7日之前在市场上流通并已获得IEC 61215证书的晶体硅光伏组件产品，必须在2022年1月7日之前根据本法规的规定重新认证。
•2021年1月7日之后流通的晶体硅光伏组件产品应在2022年1月7日之前满足SNI在本法规中的要求。
英文原文：
Minister of Energy and Mineral Resources Decree No. 2 of 2021 regarding Mandatory Implementation of The Indonesian National Standard for Crystalline Silicon Photovoltaic Modules is now being stipulated. This decree enforces 3 SNI's for photovoltaics cell assembled in modules or made up into panels, with HS ex. 8541.40.22. All products covered in this regulation shall comply with:
1. SNI IEC 61215-1: 2016, Terrestrial Photovoltaic Module (FV)- design qualification and type attestation- Part 1: Test requirement;
2. SNI IEC 61215-2: 2016, Terrestrial Photovoltaic Module (FV)- design qualification and type attestation- Part 2: Test procedures;
3. SNI IEC 61215-1-1: 2016, Terrestrial Photovoltaic Module (FV)- design qualification and type attestation- Part 1-1: Specific requirements for testing Crystalline Silicon Photovoltaic Module.
Manufacturer or importers shall obtain approval for the use of SNI Marking (SPPT SNI) and put SNI marking on the products after the products are certified by the Product Certification Body accredited by National Accreditation Committee of Indonesia /KAN.
Procedure and process of Crystalline Silicon Photovoltaic Module Certification is conducted in accordance with Annex II which is an integral part of this regulation.
Crystalline Silicon Photovoltaic Modules that are exempt from compulsory SNI were those to be used as SPPT-SNI issuance test sample and/ or test sample for research and development. Procedures for obtaining the exemption letter are explained in Annex I which is an integral part of this regulation.
In the circumstances that the amount of Conformity Assessment Bodies is not sufficient, the Directorate General will appoint CAB(s) for a period of time maximum 2 (two) years and can be extended for 1 (one) time extension with a maximum period of 2 (two) years. Procedures for the appointment of CABs are explained in Annex III which is an integral part of this regulation.
When this Ministerial Regulation comes into force (7 January 2021),
• Crystalline Silicon Photovoltaic Modules Products which have been utilized by users before this regulation comes into force, have no obligation to comply with this regulation.
• Crystalline Silicon Photovoltaic Modules Products that circulate in market and already have IEC 61215 certificate before 7 January 2021, must be re-certified in accordance with the provisions in this regulation no later than 7 January 2022.
• Crystalline Silicon Photovoltaic Modules Products circulate after 7 January 2021, shall fulfil to SNI's requirements in this Regulation no later than 7 January 2022.
技术服务中心
地址：北京市东城区建国门内大街18号（恒基中心）办公楼2座8层 邮编：100005
电话总机：010-58280809 传真：010-58280810，010-58280820 会员服务邮箱：member@cccme.org.cn
会员服务热线: 010-58280888，010-58280836（工作日上午8：00-12：00 下午13：30-17：00）
Copyright © CCCME 中国机电产品进出口商会 版权所有 京ICP备11002874号-14|
京公网安备 11010102006109号